Bfd Packet Format - Dell Z9500 Configuration Manual

Z-series core and aggregation switche

Hide thumbs Also See for Z9500:

Table of Contents

BFD Packet Format

Control packets are encapsulated in user datagram protocol (UDP) packets. The following illustration shows the complete

encapsulation of a BFD control packet inside an IPv4 packet.

Figure 9. BFD in IPv4 Packet Format

Diagnostic Code

The reason that the last session failed.

The current local session state. Refer to

A bit that indicates packet function. If the poll bit is set, the receiving system must respond as soon as

possible, without regard to its transmit interval. The responding system clears the poll bit and sets the

final bit in its response. The poll and final bits are used during the handshake and in Demand mode (refer

Dell Networking OS does not currently support multi-point sessions, Demand mode,

authentication, or control plane independence; these bits are always clear.

Bidirectional Forwarding Detection (BFD)