Replacing The High And Low Beam Bulbs - Ducati Streetfighter Owner's Manual

Replacing the high and low beam bulbs

Before replacing a blown bulb, make sure that the
replacement bulb has the same voltage and power as
that specified in the paragraph "Electrical System"
on p. 142. Always check that the bulb functions
before reassembling removed parts.
Shown in fig. 86 are the locations of the low beam
(LO) high beam (HI) bulb (1) and parking light bulb (2).
Headlight
Important
Have the high and low beam bulbs replaced by
a Ducati Dealer or an Authorized Service Center.
Warning
The headlight might fog up if the vehicle is used
under the rain or after washing.
Switch headlight on for a short time to dry up any
condensation.
1
2
fig. 86
121