Activation Of The System - Ducati Streetfighter Owner's Manual

Activation of the system

To activate the system, the motorcycle must be
stationary and safely parked.
To enable Traction Control, enter the menu and set
"DTC" to "On" by pressing RESET button (14, fig.
14) for 3 seconds; once the 3 seconds have elapsed,
the message "DTC" will appear on the display to
indicate activation of the Ducati Traction Control
system. When activated, the message "DTC" is
visible both on the normal display and also within the
menu pages.
Note
The functions of the system
To operate on the system, the motorcycle must be
stationary and safely parked.
Each time DTC is activated, the Traction Control ECU
will set the sensitivity level to 8; the level may then
be adjusted using the function "Traction Control
Sensitivity Level Setting (DTC SETUP)".
To disable Traction Control, enter the menu and set
"DTC" to "OFF" by pressing RESET button (14, fig.
14) again for 3 seconds; once the 3 seconds have
elapsed, the message "DTC" will disappear from the
display, thereby indicating deactivation of the Ducati
Traction Control system.
If the engine suddenly stops or is switched off (Key-
Off) while Traction Control is activated, the function
58
will NOT be disabled but will still be active (DTC On)
at the next Key-ON.
If, however, battery power is suddenly cut off (Batt-
OFF), when battery power is restored and upon next
Key-On, the Traction Control will no longer be
activated (DTC OFF).
Routine maintenance
To ensure that the system continues to function
correctly it is necessary to observe the
manufacturer's programmed maintenance schedule.