Main Maintenance Operations; Change The Air Filter; Checking And Topping Up Coolant Level - Ducati Streetfighter Owner's Manual

Main maintenance operations

Change the air filter

Important
Have the air filter maintenance performed at a
Ducati Dealer or Authorized Service Center.

Checking and topping up coolant level

74)
Check coolant level in the expansion tank on the right
side of the vehicle. It should be between the two
marks (1) and (2). Mark (2) indicates MAX level; mark
(1) indicates MIN level.
Top up if the level is below the MIN mark.
Unscrew the filler plug (3, fig. 74) and add a mixture
consisting of water and SHELL Advance Coolant or
Glycoshell antifreeze (35-40% of the volume) up to
the MAX level.
Refit the filler plug (3) and reassemble all removed
parts.
This type of mixture ensures the best operating
conditions (the coolant starts to freeze at -4 °F/-20
°C).
Cooling circuit capacity: 2.3 cu. dm (liters - 0.66
gallon)
Warning
Place the motorcycle upright on a flat surface
and make sure the engine is cold before proceeding.
(fig.
3
MAX MAX MA
MIN MIN MI
1
2
fig. 74
111