Erase DDA
This function deletes all data from the DDA: the data
logger must be connected to vehicle wiring.
To erase data, enter the menu page "Erase DDA".
If you press RESET (14, fig. 14) for 3 seconds and the
Press RESET for 3 sec.
DDA is not acquiring data, the message "WAIT..." is
shown on the instrument panel for 10 seconds; after
these 10 seconds, message "ERASE OK" is
displayed for 2 seconds to confirm that the data in
the DDA data logger have been erased.
YES
If RESET (14, fig. 14) is pressed for 3 seconds while
DDA=ON?
for 3 sec.
the DDA data logger is acquiring data, the data logger
NO
memory is not erased and the instrument panel
displays message "FAIL" for 2 seconds.
for 10 sec.
for 3 sec.
fig. 35
56