Upon Key-On, the dashboard will always indicate the
following information (disabling any previously
activated functions, except the Traction Control, if
active):
ODOMETER
SPEED
RPM BAR GRAPH
ENGINE COOLANT TEMPERATURE BAR GRAPH
With the button (1, fig. 19) "▲" the ODOMETER
READOUT (TOT) will cycle through the following
functions:
TRIP
TRIP FUEL (only if active)
CLOCK
T_AIR
DTC (available only if Traction Control is fitted and
active)
until cycling back to the ODOMETER (TOT) function.
Pressing button (2, fig. 19) "▼" gives access to the
MENU and the following functions are displayed one
after another:
ERROR (only if at least one error is present)
BATT
RPM
LIGHT SET
LAP (OFF or ON)
1
2
LAP MEM
DDA (OFF or ON)
ERASE DDA
DTC OFF/ON (active only if Traction Control is fitted)
DTC SETUP (active only if DTC has been activated)
DQS OFF/ON (working only if the Performance quick
shifter kit part no. 96524412A is fitted)
TIME SET
CODE (only if active)
fig. 19
37