Lights 9+ 9B + 9C: These lights come on steady at
800 rpm below the limiter threshold.
Lights 9A + 9B + 9C: They start flashing when the rev
limiter is reached.
10) TRACTION CONTROL LIGHT (RED) (fig. 13)
Lights 10B + 10C: with DTC active, these lights turn
on when a low torque reduction is applied.
Lights 10+ 10B + 10C: with DTC active, these lights
turn on when a high torque reduction is applied.
11) CONTROL SWITCH (fig. 14)
Button used to display and set dashboard parameters
"▲".
12) CONTROL SWITCH (fig. 14)
Button used to display and set dashboard parameters
"▼".
13) HIGH-BEAM FLASH BUTTON FLASH (fig. 14)
The high-beam flash button may also be used for LAP
functions and DDA data acquisition of the dashboard.
14) TURN INDICATORS CANCEL BUTTON (fig. 14)
32
9B
10B
11
14
12
9C
10A
9A
10C
fig. 13
13
fig. 14