Stored Data Display (Lap Memory) - Ducati Streetfighter Owner's Manual

Stored data display (LAP Memory)

Displays the data saved using the LAP function: lap time,
MAX RPM and rev limiter, if kicked in.
To display the saved lap times, go into the menu and select
the "LAP MEM" page.
Holding the RESET button (14, fig. 5) pressed for 3 seconds
in this menu page accesses the "1st lap" view mode. the
dashboard will show lap number, lap time, and MAX RPM
reached during that lap.
Press button (1, fig. 10) "▲" repeatedly to scroll through the
30 laps stored until returning to the 1st lap.
If you press the RESET button (14, fig. 5) for 3 seconds while
the saved times are displayed, the dashboard immediately
resets all the saved times; In this case, if the LAP function
was active, it is switched off automatically.
If the memory is empty, the display shows the 30 times, with
the lap timer reading "00.00.00", MAX RPM = 0 and MAX
speed = 0.
If the engine reached one of the two thresholds before the
limiter or the limiter threshold during a lap, the corresponding
lights (9, fig. 3) come on while viewing stored lap times.
press RESET for 3 secs.
press RESET for 3 secs.
press "▲"
press "▲" (29 times)
press "▲"
E
press "▼"
3 secs.
press "▼"
3 secs.
press "▼"
3 secs.
press "▼"
3 secs.
fig. 24
31