Stored Lap Display Function - Ducati Diavel Carbon Owner's Manual

Stored LAP display function

This function displays the stored LAPs. To access the
function it is necessary to view the "setting" menu
page page 86; using button (1) or (2) select the "LAP"
function and press the reset button (4) to go to next
page.
Use button (1) or (2) to select "LAP DATA" indication
and press the reset button (4) again to enter the page
showing the previously recorded lap times.
The instrument panel displays the information as
follows:
- at top left, the number of the displayed lap (e.g.
LAP N.01);
- at bottom left, a rectangle inside which is the lap
time (TIME), top speed in that lap (SPEED MAX)
and top rpm in the same lap (RPM MAX);
- on the right, use button (1) or (2) to select
"NEXT" (so that every time the reset button (4)
is pressed the next lap is displayed) or "PREV"
(so that every time the reset button (4) is pressed
the previous lap is displayed);
To exit, select "EXIT" and press the reset button (4).
Note
The MAX stored speed is the displayed one
(increased by 5%).
If no lap times are saved in memory, "NO LAP"
indication is displayed and lap timer will indicate "-.-
-.- -", MAX rpm will be = - - - - - - and MAX speed = -
- - - -.
Note
If the stored times are deleted while the LAP
function is active, it will be automatically deactivated.
111