Stored Data Display (Lap Memory) - Ducati Streetfighter Owner's Manual

Stored data display (LAP Memory)

It displays data stored using the LAP function: lap
time, MAX rpm and rev limiter, if kicked in.
To view stored lap times, enter the menu and go to
page "LAP MEM".
Holding RESET button (14, fig. 5) pressed for 3
seconds in this menu page accesses the "1st lap"
view mode. The instrument panel will show the lap
number, lap time, and the MAX rpm reached for the
lap in question.
Press button (1, fig. 10) "▲" repeatedly to scroll
through the 30 laps stored until returning to the 1st
lap. If you press RESET button (14, fig. 5) for 3
seconds while the saved times are displayed, the
instrument panel immediately resets all the saved
times and the LAP function is disabled automatically,
if active.
If there is no reading in the memory, the 30 times are
shown, with the display showing "00.00.00", MAX
rpm = 0 and MAX speed = 0.
If the engine reached one of the two thresholds
before the limiter or the limiter threshold during a lap,
the corresponding lights (9, fig. 3) come on while
viewing stored lap times.
press RESET for 3 sec.
press RESET for 3 sec.
press "▲"
press "▲" (29 times)
press "▲"
press "▼"
for 3 sec.
press "▼"
for 3 sec.
press "▼"
for 3 sec.
press "▼"
for 3 sec.
fig. 24
41