Stored Lap Display Function - Ducati MULTISTRADA 1200S Owner's Manual

Hide thumbs Also See for MULTISTRADA 1200S:
Table of Contents

Advertisement

Stored LAP display function

This function displays the stored LAPs.
To display the function, enter the "Setting" menu
page 101 and access the "LAP" page.
In the next display, press the reset button (4) showing
"MEMORY".
The instrument panel displays the information as
follows.
Round display (B):
-
the number of the displayed lap (ex: N.1);
-
"NEXT" to display the next LAP;
-
"RESET" to delete all the stored times.
To exit, select "EXIT" and press the reset button (4).
Main display (A):
-
the time to the upper left (ex: 1:50:97);
-
the maximum speed reached in the registered
LAP to the upper right;
-
the number of maximum RPMs reached in the
registered lap at the bottom.
Note
The MAX stored speed is indicated on the main
display (A) (increased by 8%). If MAX speed reading
exceeds 299 km/h (186 mph) while the information is
stored, speed reading is displayed (example: 316 km/
h).
If there is no reading in the memory, the 30 times are
shown, with the display showing "0.00.00", MAX
rpm = 0 and MAX speed = 0. If while registering the
LAP the engine reaches the threshold that precedes
the rev limiter or rev limiter threshold, the relative
light "Over Rev" (9) will turn on when displaying the
stored times. To display other stored times, select
"NEXT" and press the reset button (4); the next lap
will be displayed each time the reset button (4) is
pressed. To delete all the stored times, select
"RESET" and press the rest button (4) for 3 seconds.
Note
If the stored times are deleted while the LAP
function is active, it will be automatically deactivated.
139

Advertisement

Table of Contents
loading

Table of Contents