Stored Data Display (Lap Memory) - Ducati SPECIAL EDITION SUPERBIKE 848 EVO CORSE Owner's Manual

Stored data display (LAP Memory)

It displays data stored using the LAP function: lap
time, MAX speed and MAX rpm.
To view stored lap times, enter the menu and go to
page "LAP MEM".
Holding switch (12, fig. 6) pressed in position B "▼"
for 3 seconds in this menu page accesses the "1st
lap" view mode. The display will show the lap
number, lap time, MAX speed and the MAX rpm
reached for the lap in question.
Press switch (12, fig. 6) in position B "▼" repeatedly
to scroll through the 30 laps stored until returning to
the 1st lap.
If you press switch (12, fig. 6) in position B "▼" for 3
seconds while the saved times are displayed, the
display immediately resets all the saved times and
the LAP function is disabled automatically, if active.
The MAX speed saved is the maximum speed
indicated on the display in Lap function.
If MAX speed reading exceeds 299 Km/h (186 mph)
while the information is stored, speed reading is
displayed (example: 316 Km/h).
B
A
B x 19
A
A
B x 19
A
B
B = ON for 3
secs.
Resets lap
times in
memory
B
fig. 23
39