Turn indicators automatic "RESET"
function
After activating one of the two turn indicators, user can reset
them using the RESET button (14, fig. 5).
If turn indicator is not "RESET", it will automatically switch
off after the vehicle has covered 1 Km (0.6 miles) since turn
indicator was activated.
Headlight "gradual" SWITCH-ON
Upon the Key-On, the Low beam (LO) turns on gradually (it
takes about 3 sec. to reach full lighting state),
while it turns off at once.
Headlight "smart" auto-off
This function allows you to reduce current consumption from
the battery, by automatically managing headlight switching-
off. The device is triggered in 3 cases:
- 1) When the key is turned from OFF to ON and the
engine is not started within 60 seconds, the headlight is
turned off and will be turned back on next time you start
the engine.
- in case 2, after the vehicle has been running with the
headlights on and the engine is stopped using the RUN-
STOP button on the RH switch.
In this case, 60 seconds after stopping the engine, the
headlight is turned off and will be turned back on next
time you start the engine.
- 3) While starting up the engine, the headlight is turned off
and back on as soon as the engine is started.
E
47