Replacing the high and low beam bulbs
Before replacing a burnt-out bulb, make sure that the new
bulb complies with the voltage and wattage specified in the
"Wiring diagram", page 113. Always test the new bulb
before refitting any parts you have removed.
Shown in fig. 77 are the locations of the low beam bulb (LO)
(1), high beam bulb (HI) and parking light bulb (2).
Have the high and low beam bulbs replaced by a Ducati
Dealer or an authorised Service Centre.
The headlight might fog up if the vehicle is used when
raining or after washing.
Switch the headlight on for a short time to dry up any