Ducati Streetfighter Owner's Manual page 18

Upon Key-On, the dashboard always displays the following
information (and any functions activated previously are
deactivated, apart from the Traction Control, when active):
ODOMETER
SPEED
RPM BARGRAPH
ENGINE COOLANT TEMPERATURE BARGRAPH
With the button (1, fig. 11) "▲", the Odometer readout (TOT)
will cycle through the following functions:
TRIP
TRIP FUEL (only if active)
CLOCK
T_AIR
DTC (available only if Traction Control is fitted and active)
until cycling back to the ODOMETER (TOT) function.
Pressing button (2, fig. 11) "▼" gives access to the MENU
and the following functions are displayed one after another:
ERROR (only if at least one error is present)
BATT
RPM
LIGHT SET
LAP (OFF or ON)
LAP MEM
DDA (OFF or ON)
ERASE DDA
1
2
DTC OFF/ON (active only if Traction Control is fitted)
DTC SETUP (active only if DTC has been activated)
TIME SET
CODE (only if active)
Important
This menu is only active when the vehicle is running at
less than 20 Km/h; if this MENU is open while the vehicle is
running faster than 20 Km/h, the instrument panel will exit it
automatically and go back to the start-up display screen; you
may exit the MENU at any time by holding button (2, fig. 11)
"▼" depressed for 3 seconds.
E
fig. 11
17