Replacing The High And Low Beam Bulbs - Ducati Streetfighter Owner's Manual

Replacing the high and low beam bulbs

Before replacing a burnt-out bulb, make sure that the new
one complies with voltage and wattage as specified in the
section covering the Electric System for that lighting device
(page 112). Always test the new lamp before refitting the
parts you have removed.
Shown in fig. 82 are the locations of the low beam bulb (LO)
(1), high beam bulb (HI) and parking light bulb (2).
Headlight
Important
Have the high and low beam bulbs replaced by a Ducati
Dealer or an authorised Service Centre.
1
2
fig. 82
E
91