2F7
2-1-5
Transfer/separation section
(1) Transfer/separation section
The image developed by toner on the drum is transferred onto the paper because of the electrical attraction between the
toner itself and the transfer roller. The transfer roller is negatively biased so that the positively charged toner is attracted
onto the paper while it is pinched by the drum and the transfer roller.
Engine PWB
2-1-8
Figure 2-1-13Transfer/separation section
(1)
Transfer roller
(2)
Paper chute guide
(3)
Separation brush
Separation bias
Transfer bias
Figure 2-1-14Transfer /separation section block diagram
Separation
brush
Transfer
roller