Kyocera FS-6950DN Service Manual page 25

5. Pull the release lever on the right side guide
and slide to the desired paper size.
6. Pull the release lever and slide the paper
stopper to the desired paper size.
If using A3 or Ledger paper, pull out the
extension paper cassettes pushing the lock
lever one by one and adjust them to the
desired paper size.
7. Place the paper in the cassette, with side to
be printed downward, so that the leading
edge is aligned against the paper stopper.
Put the cassette cover.
8. Insert the paper cassette into the slot in the
printer. Push it straight in as far as it will go.
Side guide
Figure 1-2-10
Figure 1-2-11
Release lever
Side guide
Lock lever
Release lever
Paper stopper
Extension paper
cassette
Lock lever
2F7
1-2-7