Kyocera FS-6950DN Service Manual page 88

2F7-2
(2) Detaching and refitting the main PWB
Procedure
1. Remove the top cover (See page P.1-5-2).
2. Remove the right and left cover (See page
P.1-5-3).
3. Remove the six connectors from the main
PWB.
4. Remove the one screw and then remove the
connect-R PWB.
5. Remove the wires from clamp.
6. Remove the six screws and then remove the
controller box (main PWB).
1-5-26
Connectors (six)
Main PWB
Connect-R
PWB
Clamp
Screw
Screw
Controller box
Screw
Screw
Screw
Figure 1-5-36
Screw
Figure 1-5-37
Screw