Kyocera FS-6950DN Service Manual page 43

Service items
No. Items
(11) Service Call (Self
diagnostic error)
Log
(12) Maintenance Log
NOTE:
It is not logged if
100 or more
counts are not
added to the count
at the last occur-
rence of replace-
ment.
(13) Unknown Toner
Log
NOTE:
It is not logged if
100 or more
counts are not
added to the count
at the last error.
(14) Counter Log
Comprised of
three log counters
including paper
jams, self diagnos-
tics errors, and
replacement of the
toner container.
NOTE:
It is not logged if
100 or more
counts are not
added to the count
at the last error.
#
Remembers 1 to 8 of occur-
rence of self diagnostics
error. If the occurrence of
the previous diagnostics
error is less than 8, all of the
diagnostics errors are
logged.
#
Remembers 1 to 8 of occur-
rence of replacement. If the
occurrence of the previous
replacement of toner con-
tainer is less than 8, all of
the occurrences of replace-
ment are logged.
#
Remembers 1 to 5 of occur-
rence of unknown toner
detection.
If the occurrence of the pre-
vious unknown toner detec-
tion is less than 5, all of the
unknown toner detection are
logged.
(g) Jam
Indicates the log counter of
paper jams depending on
location.
Refer to Paper Jam Log.
All instances including those
are not occurred are dis-
played.
Description
Description
Count.
The total page count at the
time of the self diagnostics
error.
Count.
The total page count at the
time of the replacement of
the toner container.
This is virtually logged as
the occurrence of the
"Toner Empty" or "Install
MK" condition since the
replacement of the toner
container is not precisely
detectable.
Count.
The total page count at the
time of the "Toner Empty"
error with using an
unknown toner container.
(h) Self diagnostic error
Indicates the log counter
of self diagnostics errors
depending on cause. (See
page P.1-4-2)
Example
C6000: 4
Self diagnostics error
6000 has happened four
times.
Service Code
Self diagnostic error code
Example
01.6000
01 means a self-diagnostic
error; 6000 means a self
diagnostic error code.
(See page P.1-4-2)
Item
Code of maintenance replac-
ing item (1 byte, 2 categories)
First byte (Replacing item)
01: Toner container
02: Maintenance kit
Second byte (Type of replac-
ing item)
00: Fixed (Toner container or
maintenance kit)
Item
Unknown toner log code (1
byte, 2 categories)
First byte
01: Fixed (Toner container)
Second byte
00: Fixed (Black)
(i) Maintenance item replac-
ing
Indicates the log counter
depending on the mainte-
nance item for maintenance.
T: Toner container
00: Black
M: Maintenance kit
00: MK-430
Example
T00: 1
The (black) toner container
has been replaced once.
This is virtually logged as the
occurrence of the" Toner
Empty" or "Install MK" condi-
tion.
2F7-4
1-3-13