Kyocera FS-6950DN Service Manual page 83

8. Remove the one screw (nut) and then
remove the fuser thermistor M.
9. Remove the two screws (nuts) and then
remove the terminal and cord plate.
10. Remove the thermal cutout
11. Check or replace the fuser thermistor S and
M and thermal cutout and refit all the
removed parts.
Screw
Fuser
thermistor M
Figure 1-5-28
Terminal
Thermal
cutout
Figure 1-5-29
2F7
Nut
Screw
Screw
Cord plate
Nut
Nut
1-5-21