Kyocera FS-6950DN Service Manual page 92

2F7
1-5-9 Others
(1) Detaching and refitting the paper feed drive unit
Procedure
1. Remove the paper cassette.
2. Remove the developer unit (See page P.1-5-
10).
3. Remove the top cover (See page P.1-5-2).
4. Remove the right cover (See page P.1-5-3).
5. Remove the five connectors from the con-
nect-R PWB.
6. Remove wires from the clamp.
7. While opening the four hooks and then
remove the wires.
8. Remove the right fan motor.
9. Remove the three screws and then remove
the paper feed drive unit.
10. Check or replace the paper feed drive unit
and refit all the removed parts.
11. To refit the paper feed drive unit, make sure
mesh of gears.
1-5-30
Right fan motor
Hook
Hook
Gear
Gear
Paper feed
drive unit
Clamp
Connectors
Hook
(five)
Connect-R PWB
Hook
Figure 1-5-43
Screw
Paper feed
Screw
drive unit
Figure 1-5-44
Screw