Kyocera FS-6950DN Service Manual page 97

(2) Downloading the firmware from the memory card
The procedure below provides how to download firmware from a memory card.
Note that you can download both the system and engine firmware at a time.
1. Turn printer power off.
2. Remove two screws and then remove the
interface slot cover.
3. Insert the memory card into the printer's
memory card slot.
4. Turn printer power on.
5. Press Menu key on the printer's operation
panel and carry out the memory card for-
matting procedure (1).
6. When formatting is complete, turn printer
power off.
7. Remove the formatted memory card from
the memory card slot.
8. Insert the memory card to the PC's slot or to
the adaptor.
9. Copy the firmware file to download to the
root directory of the memory card.
10. Remove the memory card from the PC's slot
or the adaptor.
Memory card slot
Interface slot cover
Message display
Ready
Press the Menu key.
Memory Card
Press the
>Format
(1)
Press the OK key.
>Format ?
Press the OK key.
Processing
(Format information is
automatically printed.)
Ready
Memory card
Memory card
Screw
Screw
Figure 1-6-4
Operation panel keys
Press the
>
key. Press the
Figure 1-6-5
Adaptor
(Memory card read/writer)
Figure 1-6-6
2F7-4
or key.
or key.
To PC
1-6-3