Service Data - Takeuchi TB014 Operator's Manual

MAINTENANCE

Service Data

Fuel and Lubricant Chart
Use different fuels, lubricants and greases according to the temperature, referring to the
chart below.
¡ Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡ Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Part
Diesel
Engine
engine oil
oil pan
API - CD
Antiwear
hydraulic oil
Hydraulic
(Option:
tank
Biodegradable
oil)
Fuel tank
Diesel fuel
Engine
Coolant (water*
cooling
+ coolant**)
system
Travel
Gear oil
reduction
API-GL-4
gear
Slew motor
pinion
Lithium
Slew
based
bearing
grease
Working
EP-2
equipment
NLGI No. 2
Levers
* For water, use tap water (soft). Do not use well or river water.
** When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the
coolant manufacturer's instructions to determine the mixture ratio.
Type by temperature
Type
-22 -4 14 32 50 68 86 104
-30 -20 -10 0 10 20 30 40
SAE 5W-20
Use a clean, Quality fuel for good performance and optimum engine life.
¡ To prevent fuel flow problems in cold weather, use diesel fuel with a pour point of at
least -12°C (10°F) below the lowest expected ambient temperature.
¡ Minimum cetane number is 45. Low temperature or high altitude operation may
require the use of fuel with a higher cetane number.
50% coolant mixture
SAE 10W-30
SAE 15W-40
ISO VG32
ISO VG46
ISO VG68
30% coolant mixture
SAE 90
98
Replacement
°
F
R R R R R (US. qt.)
interval
°
C
Upper limit:
TB014: 3.0 (3.2)
After first 50
TB016: 2.8 (3.0)
hrs.
Lower limit:
Every 250 hrs.
TB014: 1.7 (1.8)
TB016: 1.5 (1.6)
System:
TB014: 33 (34.9)
TB016: 33.5 (35.4)
Every 2000 hrs.
Tank:
23 (24.3)
Tank:
21 (22.2)
Every 1000 hrs. 3.4 (3.6)
After first 250 hrs. 0.33
Every 1000 hrs. (0.35)each
Every 50 hrs.
Every 50 hrs.
As
required
Daily or every
10 hrs.
When
required
Capacity