Takeuchi TB014 Operator's Manual page 59

CONTROLS
Accessories
To change the program, press the fast-
forward and rewind buttons simultaneously.
The direction of tape feed will reverse.
¡When the tape ends in one direction, the
system automatically reverses the tape
and plays the other side.
¡To stop fast-forwarding or rewinding, lightly
touch the unlocked key. This frees the
locked key and normal playing resumes.
(9) Tuner switch (Manual tuning)
Pressing the shaped TUNER button raises
the receiving frequency. Pressing the
shaped TUNER button lowers the receiving
frequency similarly. Pressing either of these
buttons continuously shifts the receiving
frequency continuously.
(10) SEEK switch
Pressing the "SEEK" button shifts the
receiving frequency in the higher frequency
direction before automatically stopping at a
position where a station is picked up.
(11) LOUD switch
This button is used to operate the system at
a lower sound volume but with enhanced
bass and treble sound. ("
appears on the display.)
(12) Band select switch
Pressing the "BAND" button changes over
between FM1, FM2 and AM (MW) bands.
The display indicates the receiving band
name and frequency.
(13) Metal switch
Press the "MTL" (5) button before playing a
C4C022
metal or CrO
The "MTL" indication appears on the display.
(14) Preset switch keys
One station each in the FM1, FM2 and
AM(MW) bands, respectively, can be preset
for each of these preset keys.
When listening to a preset station, select
either of the AM, FM1,FM2 bands using the
band select switch, then simply press the
number key corresponding to the preset
selected station.
The system can memorize 6 stations in AM
band and 12 stations in FM bands (FM1: 6
stations and FM2: 6 stations).
Manual Memory
Use manual tuning button or seek tuning
button to choose a radio station if a
broadcasting station is wanted to be
recorded. For 2 seconds press 1 – 6 preset
key when the indication of frequency has
already shown and the frequency is
recorded. Flash stops and channel starts
functioning.
¡ If the main power supply is interrupted,
" indication
57
tape.
2
such as when exchanging machine
battery, all presettings will be erased.
Repeat the presetting procedure in
such case.