Doors And Covers - Takeuchi TB014 Operator's Manual

CONTROLS

Doors and Covers

Starter Key
The starter key is used not only to start and
stop the engine, but also to lock and unlock the
cab door, engine hood, fuel cap, manual storage
compartment, storage box and tool box.
Cab Door (Cab)
WARNING
When mounting and dismounting the
cab, first open the door fully to the locked
position and check that it does not move.
Open the door fully and press it against the catch
at the back of the door to lock it in place. Always
lock the door when mounting and dismounting
and when operating the machine.
Opening
2
1. Insert the starter key and turn it clockwise
to unlock the door.
2. Pull the knob (1) towards you and open
the door.
To open the door from inside the cab, push
the lever (2) to the front.
3. Open the door fully and press it against
the cab to lock it in place.
Closing
E4B003
3
1. Either push release lever (3) to the front
or lower release lever (4).
2. Close the released door.
Front Window (Cab)
¡ ¡ ¡ ¡ ¡ Grasp the handles firmly with both
hands when opening and closing the
front window. Your head or hands may
get caught if they slip.
¡ ¡ ¡ ¡ ¡ If you open the front window, be sure
to lock it in place with the lock pins on
the left and right sides. The window
may fall if it is not locked in place.
1
Opening
Released
C4C001
1
1. Park on a level surface and stop the engine.
38
4
WARNING
1 3 1
Locked
1
C4C002
C4C003