Service Data - Takeuchi TB23R Operator's Manual

MAINTENANCE

Service Data

Lubricant and Fuel Chart
Use different lubricants, greases and fuels according to the temperature, referring to the chart below.
� Change the lubricant earlier than as shown in the table if it is extremely dirty or its performance
has deteriorated severely.
� Whenever possible, use the same brand of lubricant as before. If changing with a different brand,
replace the entire quantity – do not mix different brands.
Lubricants and greases
Part
Diesel engine
Engine
oil
oil pan
API - CD
Takeuchi
genuine
hydraulic oil
46
Hydraulic
tank
Antiwear
hydraulic oil
Engine
Coolant
cooling
(water +
system
coolant)*
Travel
Gear oil
reduction
API-GL-4
gear
Slew motor
pinion
Lithium
Slew
based
bearing
grease
Working
EP-2
equipment
NLGI No. 2
Levers and
pedals
*: For water, use tap water (soft). Do not use well or river water. When the ambient temperature
drops below 0°C, add coolant (antifreeze). Follow the coolant manufacturer's instructions to
determine the mixture ratio.
Type by temperature
Type
-22 -4 14 32 50 68 86 104 °F
-30 -20 -10 0 10 20 30 40 °C
SAE 5W-20
50% coolant mixture
SAE 10W-30
SAE 15W-40
ISO VG46
ISO VG32
ISO VG46
ISO VG68
30% coolant mixture
SAE 90
94
Replacement Capacity
interval Lit (US. qt.)
Upper limit:
3.4 (3.6)
After first 50 hrs.
Every 250 hrs.
Lower limit:
1.8 (1.9)
Every 4000
hrs.***
System: 38
(10 US.gal.)
Tank: 25
(6.6 US.gal.)
Every 2000
hrs.***
Every 1000 hrs. 3.5 (3.7)
After first 100
0.35 (0.37)
to 250 hrs.**
each
Every 1000 hrs.
Every 50 hrs.
Every 50 hrs.
As required
Daily or every
10 hrs.
When required