OPTIONS
Switching the Lever Pattern
The operating pattern of the left and right operating levers can be changed.
Before starting the engine, check the selector to see which operating pattern the left
and right operating levers are set for.
A
ISO
ISO
G
JCB
JCB
Switching the Lever Pattern
G
A
3
2
1
(A) : ISO pattern
(G) : JCB pattern
1. Open the maintenance cover.
2. Loosen the wing bolt (2) from selector
valve (1).
3. Turn the lever (3) to switch the pattern.
WARNING
4. Tighten the wing bolt (2) and fasten the
lever (3) in place.
5. Close the maintenance cover and check
the lever pattern.
C4L003
185
C4L004