Takeuchi TB014 Operator's Manual page 70

Table of Contents

Advertisement

OPERATION
Machine Operation
Warming Up the Machine
(Hydraulic Oil)
WARNING
Operating the working equipment without
warming up the machine (hydraulic oil)
is dangerous, as response will be slow
and the equipment may move in
unexpected ways. Be sure to sufficiently
warm up the machine.
IMPORTANT: Do not operate the levers
suddenly when the hydraulic oil
temperature is below 20
proper hydraulic oil temperature during
operation is 50 to 80
if operations must be performed at lower
temperatures, heat up the hydraulic oil
°
to at least 20
C (68
Normal Warm-up
1. Pull the throttle lever to the middle position,
then run the engine at medium speed for
about 5 minutes with no load.
2. Set the safety lock lever to the released
position and lift the bucket from the
ground.
°
°
C (68
F). The
°
°
C (122 to 176
F), but
°
F).
D5D014E
C4D007
3. Extend and retract each of the cylinders
several times with no load.
4. Slew slowly left and right several times.
5. Travel slowly forward and backward
several times.
68
G4D005

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tb016

Table of Contents