High-Back Seat - Takeuchi TB014 Operator's Manual

OPTIONS

High-back Seat

Seat
WARNING
Adjust, secure and latch the operator's
seat.
1
3
(A) Back angle adjustment
1. Raising your torso, sitting down firmly in
the seat.
2. Pulling lever (1) allows you to use the
pressure of the springs in the seat pressing
against your back to adjust the reclining
angle of the seat back. Release the lever
(1) at the desired angle and the seat back
will be locked in that position.
(B) Fore-and-aft adjustment
1. Pull on lever (2) and slide the seat
backward or forward to bring it to the
optimum position for operating the
machine.
2. Release the lever (2) at the desired
position and the seat will be locked there.
Adjustment stroke: 10 steps,
A
B
C4L016
150 mm (5.9 in.)
3
130kg
C
(287 lbs.)
(C) Weight adjustment
1. Turn handle (3) to the front side and set it
to indicate the weight of the person to
operate the machine.
May be set to any value from 10 kg (22
lbs.) steps, 50 to 130 kg (110 to 287 lbs.).
2. When adjusting for a weight lower than
the currently set weight, first turn handle
(3) as far as it goes to cancel the setting,
then readjust.
2
197
50kg (110 lbs.)
C4L017