Securing The Machine; Cautions On Transporting - Takeuchi TB014 Operator's Manual

TRANSPORT

Securing the Machine

After loading the machine in the designated
position, secure it as described below.
Transporting Posture
1. Lower the dozer blade.
2. Fully extend the bucket and arm cylinders,
then lower the boom.
3. Stop the engine and remove the starter
key.
4. Set the safety lock lever securely to the
locked position.
5. Set stoppers in front and behind the
crawlers.
6. Put a chain or wire rope over the lower
frame and fasten it securely to prevent
sideways slippage.
7. Secure the bucket with a chain or wire
rope.
IMPORTANT: Place a wooden block
under the bucket so that it is not damaged
by hitting the floor.
TRANSPORT

Cautions on Transporting

Wire rope
Cautions on Transporting
¡ ¡ ¡ ¡ ¡ Know and follow the safety rules,
vehicle code and traffic laws when
transporting the machine.
¡ ¡ ¡ ¡ ¡ Consider the length, width, height and
weight of the truck with the machine
loaded on it when determining the best
route.
94
Padding
WARNING
E4F002