MAINTENANCE
Service Data
Fuel and Lubricant Chart
Use different fuels, lubricants and greases according to the temperature, referring to the chart below.
¡ Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡ Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Part
Diesel
Engine
engine oil
oil pan
API-CD
Antiwear
hydraulic oil
Hydraulic
(Option:
tank
Biodegrad-
able oil)
Fuel tank
Diesel fuel
Coolant
Engine
(water +
cooling
coolant)**
system
Travel
Gear oil
reduction
API-GL-4
gear
Slew
Lithium
bearing
based
Working
grease
equipment
EP-2
NLGI No. 2
Levers
{ } : Serial No. 14515346 ~
< >: for the tropics Serial No.14517254~
Type by temperature
Type
-22 -4 14 32 50 68 86 104
-30 -20 -10 0 10 20 30 40
SAE 5W-20
Use a clean, Quality fuel for good performance and optimum engine life.
¡ To prevent fuel flow problems in cold weather, use diesel fuel with a pour point of at
least -12°C (10°F) below the lowest expected ambient temperature.
¡ Minimum cetane number is 45. Low temperature or high altitude operation may
require the use of fuel with a higher cetane number.
50% coolant mixture
SAE 10W-30
SAE 15W-40
ISO VG32
ISO VG46
ISO VG68
30% coolant mixture
SAE 90
94
Replacement
°
F
interval
°
C
Upper limit:
TB125:3.6(3.8)
TB135:4.7(5.0)
TB145:7.4(7.8)
After first 50 hrs.
Every 250 hrs.
Lower limit:
TB125:2.4(2.5)
TB135:2.9(3.1)
TB145:4.0(4.2)
System:
TB125:74(78.2)
TB135:85(89.8)
TB145:115(121.5)
Every 2000 hrs.
Tank:
TB125:48(50.7)
TB135:48(50.7)
TB145:74(77.9)
Tank:
TB125:51(53.6)
TB135:51(53.6)
TB145:73(76.6)
TB125:3.5(3.7)
TB135:5.4(5.7)
Every 1000 hrs.
TB145:6.7(7.1)
{TB145:9.6(10.1)}
<TB145:10.6(11.2)>
TB125:0.5(0.53)
After first 100 to
TB135:0.6(0.63)
250 hrs.*
TB145:0.8(0.85)
Every 1000 hrs.
{TB145:1.0(1.06)}
Every 50 hrs.
As
Daily or every
required
10 hrs.
When
required
Capacity
R
(US. qt.)