Service Data - Takeuchi TB153FR Operator's Manual

MAINTENANCE

Service Data

Lubricant and Fuel Chart
Use different lubricants, greases and fuels according to the temperature, referring to the
chart below.
¡ Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡ Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Lubricants and greases
Part
Diesel
Engine
engine oil
oil pan
API - CD
Hydraulic Antiwear
tank hydraulic oil
Engine Coolant
cooling (water +
system coolant) **
Travel
Gear oil
reduction
API-GL-4
gear
Slew
Lithium
bearing
based
Working
grease
equipment
EP-2
NLGI No. 2
Levers
* : If the percentage of the traveling time within the total operating time is high, replace the
gear oil earlier than the specified time.
** : For water, use tap water (soft). Do not use well or river water.
When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the
coolant manufacturer's instructions to determine the mixture ratio.
Type by temperature
Type
-22 -4 14 32 50 68 86 104
-30 -20 -10 0 10 20 30 40
SAE 5W-20
50% coolant mixture
SAE 10W-30
SAE 15W-40
ISO VG32
ISO VG46
ISO VG68
30% coolant mixture
SAE 90
110
Replacement
°
F
° R R R R R (US. qt.)
interval
C
Upper limit:
<TB153FR>
7.4 (7.8)
<TB180FR>
After first 50 hrs. 10.2 (10.8)
Every 250 hrs.
Lower limit:
<TB153FR>
4.0 (4.2)
<TB180FR>
5.7 (6.0)
System:
<TB153FR>
110 (29.1 US.gal.)
<TB180FR>
Every 2000 hrs.
120 (31.7 US.gal.)
Tank: 68
(18.1 US.gal.)
<TB153FR>
8.4 (8.9)
Every 1000 hrs.
<TB180FR>
9.5 (10)
<TB153FR>
After first 250
1.0 (1.06)
hrs.*
<TB180FR>
Every 1000 hrs.
1.5 (1.6)
Every 50 hrs.
Daily or every
As required
10 hrs.
When required
Capacity