Takeuchi TB014 Operator's Manual page 204

OPTIONS
Radio (for EU)
Storing preset stations ......................... 3
The preset buttons 3 can be used to store
6 stations in each band (FM1, FM2, and MW)
for convenient access to your favorite
stations.
¡Programming stations
1 Select the desired band, then tune in
the station you want to store in
memory.
2 Press and hold one of the preset
buttons for more than 2 seconds.
Repeat steps 1 and 2 to program
additional stations.
¡ Quick tuning
Select the desired band, then press one
of the six preset buttons.
ATP (Auto Travel Preset) operation ..... 4
The Auto Travel Preset function searches for
and memorizes the 6 strongest stations in
one of the two bands (FM, MW) in order of
signal strength.
This feature is useful when you are driving
in an unfamiliar location and want to
memorize local stations without changing the
standard preset stations.
A total of 12 stations (6 FM and 6 MW) can
be programmed.
¡ To set the stations
1 Select the desired band.
2 Press and hold the ATP button 4 for
more than 2 seconds, "ATP" appears
in the display.
When the stations have been
memorized, scanning stops and the
strongest station is selected.
Quick Tuning of ATP Stations
• Select the desired band.
• Press the ATP button if the "ATP"
indicator dose not appear in the display.
• Press the ATP button for less than 1
second to select the ATP presets in
sequence. If a total of six stations
cannot be preset "- - -" will be displayed
for the empty channels.
¡ To scan programmed stations
See "Preset-Scan-Button operation".
Supplement: If no station can be received,
"- - -" appears in the display.
If fewer than 6 stations can be received, the
system will memorize as many stations as
possible, then select the one memorized first.
Preset-Scan-Button operation ......... 1, 4
This function scans each of the preset
stations stored in the selected band (both
manual preset and auto travel presets).
1 Select the desired band or ATP mode.
Press the BAND/P.SCAN button 1 for
FM1, FM2 or MW, or press the ATP
button 4 for less than 0.5 seconds to
select the ATP mode.
2 Press the BAND/P.SCAN button 1 for
more than 2 seconds. The system will
select and receive each preset station for
5 seconds.
3 To stop scanning and retain the station
currently selected, press the BAND/
P.SCAN button 1 again during this five-
second period.
202