Service Data - Takeuchi TB28FR Operator's Manual

MAINTENANCE

Service Data

Fuel and Lubricant Chart
Use different fuels, lubricants and greases according to the temperature, referring to the
chart below.
¡ Change the lubricant earlier than as shown in the table if it is extremely dirty or its
performance has deteriorated severely.
¡ Whenever possible, use the same brand of lubricant as before. If changing with a different
brand, replace the entire quantity – do not mix different brands.
Type
Part
Diesel
Engine
engine oil
oil pan
API-CD
Antiwear
Hydraulic
hydraulic oil
tank
Fuel tank
Diesel fuel
Coolant
Engine
(water ** +
cooling
system coolant ***)
Travel
Gear oil
reduction
API-GL-4
gear
Slew
Lithium
bearing
based
Working
grease
equipment
EP-2
NLGI No. 2
Levers
* If the percentage of the traveling time within the total operating time is high, replace the
gear oil earlier than the specified time.
** For water, use tap water (soft). Do not use well or river water.
***When the ambient temperature drops below 0°C, add coolant (antifreeze). Follow the
coolant manufacturer's instructions to determine the mixture ratio.
Type by temperature
-22 -4 14 32 50 68 86 104
-30 -20 -10 0 10 20 30 40
SAE 5W-20
SAE 10W-30
SAE 15W-40
ISO VG68
ISO VG46
ISO VG32
Use a clean, Quality fuel for good performance and optimum engine life.
¡To prevent fuel flow problems in cold weather, use diesel fuel with a pour point
of at least -12°C (10°F) below the lowest expected ambient temperature.
¡Minimum cetane number is 45. Low temperature or high altitude operation
may require the use of fuel with a higher cetane number.
30% coolant mixture
50% coolant mixture
SAE 90
96
Replacement
°
F
interval
° R(US. qt.)
C
Upper limit:
After first 50
3.9 (4.1)
hrs.
Lower limit:
Every 250 hrs.
2.7 (2.9)
S y s t e m : 7 0
(18.4US.gal.)
Every 2000 hrs.
T a n k : 4 4
(11.5US.gal.)
35
(9.2US.gal.)
Every 1000
4.5 (4.8)
hrs.
After first 100 to
250 hrs.* 0.5 (0.53)
Every 1000 hrs.
Every 50 hrs.
As
Daily or every
10 hrs.
required
When required
Capacity