Takeuchi TB014 Operator's Manual page 134

MAINTENANCE
When Required
Travel levers, blade lever and pedals
3
1. Remove the floor mat (1).
2. Loosen the bolts and remove cover (2).
3. Remove the lower mount section of the
boot (3) and roll it up.
4. Use the grease gun to supply grease to
the grease nipples (4).
5. Wipe off the expelled grease.
6. Reinstall the cover and floor mat, following
the removal procedure in reverse order.
Inspecting and Replenishing the
Windshield Washer Fluid
1
Use a windshield washer fluid designed
specifically for motor vehicles. Follow the
2
instructions including with the washer fluid.
C4G033
Inspection
1. Inspect the washer tank (1) and add
washer fluid if the level is low.
Replenishment
1. Mix the washer fluid to the prescribed
concentration.
2. Remove the cap (2) and add washer fluid.
3. Reinstall the cap (2).
132
2
1
C4G035