Attachment Combination Table - Takeuchi TB014 Operator's Manual

OPTIONS

Attachment Combination Table

Below is the bucket combination table for when arms and telescopic arms are installed. Heed
this table.
¡ ¡ ¡ ¡ ¡ Consult with a Takeuchi dealer before installing optional attachments.
¡ ¡ ¡ ¡ ¡ Do not use attachments that have not been approved by Takeuchi or a Takeuchi
dealer. Doing so may compromise safety or adversely affect the machine's operation
or service life.
¡ ¡ ¡ ¡ ¡ Takeuchi will not be held responsible for any injuries, accidents or damage to
products caused by the use of a non-approved attachment.
¡ ¡ ¡ ¡ ¡ Add an extra weight when using a long arm or a telescopic arm.
¡ ¡ ¡ ¡ ¡ Install a swing stopper when a bucket wider than the standard bucket, long arm and
telescopic arm is installed and when using a cab version.
: Usable
∆ : Usable for light operations (digging and loading operations with dry, loose sand or mud)
— : Not usable
Total bucket weight = Weight of bucket + Weight of full bucket load (specific gravity : 1.8)
TB014
Rated Capacity
TB016
260W Bucket
300W Bucket
350W Bucket
450W (S.T.D.) Bucket
500W Bucket
Three-Hole Bucket
Total bucket weight = Within 98 kg
for Telescopic Arm
Total bucket weight = Within 127 kg
Hydraulic Breaker (TKB-71)
Bucket cutting
width
3
m (cu.yd.)
mm (inch)
0.020 (0.026) 265 (10.4)
0.023 (0.030) 300 (11.8)
0.027 (0.035) 335 (13.2)
0.038 (0.049) 435 (17.1)
0.043 (0.056) 485 (19.1)
0.049 (0.064) 457 (18.0)
Within 485 (19.1)
(216 lb.)
Within 485 (19.1)
(280 lb.)
WARNING
830 mm
(33 in.) Arm
930 mm
(37 in.) Arm
186
1040 mm
(41 in.) Arm
Telescopic Arm
1130 mm
930 to 1380 mm
(44 in.) Arm
(37 to 54 in.)
—
—
—
—
—