Saving Changes To The Registry - Honeywell vx6 Reference Manual

Saving Changes to the Registry

The VX6 saves the registry when you:
Tap Start > Run then type Warmboot. Tap OK.
l
Perform a Suspend / Resume function (by pressing the Pwr key and then pressing it again).
l
The registry save process takes 0 – 3 seconds. If nothing has been changed, nothing is saved (e.g. 0 seconds).
The registry is automatically saved every 20 minutes. It is also saved every tenth time the registry settings are changed.
Registry settings are changed when control panel applet (e.g. Date/Time) parameters are changed by the user and a warm boot
was not performed afterward.
When you tap Start > Run then type Coldboot and tap the OK button, factory default registry settings are loaded during
coldboot. All customized changes and settings are lost.
3-4