Compliance; Emc Compliance; Safety Compliance; Pstn Regulatory Compliance - Patton electronics SmartNode 4830 Series Getting Started Manual

SmartNode 4830 Getting Started Guide

Compliance

EMC compliance:

• FCC Part 15, Class A
• EN55022, Class A
• EN55024

Safety compliance:

• UL60950-1/CSA C22.2 No. 60950-1
• IEC 60950-1
• EN60950-1

PSTN regulatory compliance:

• FCC Part 68
• CS-03
• TBR 21
• TBR 12 & 13 (E1)
• AS/ACIF S016:2001 (E1)
• AS/ACIF S043:2005 (DSL Models)

Radio and TV Interference (FCC Part 15)

The SmartNode product generates and uses radio frequency energy, and if not installed and used properly-that
is, in strict accordance with the manufacturer's instructions-may cause interference to radio and television
reception. The SmartNode product have been tested and found to comply with the limits for a Class A com-
puting device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to
provide reasonable protection from such interference in a commercial installation. However, there is no guar-
antee that interference will not occur in a particular installation. If the SmartNode product does cause interfer-
ence to radio or television reception, which can be determined by disconnecting the unit, the user is
encouraged to try to correct the interference by one or more of the following measures: moving the computing
equipment away from the receiver, re-orienting the receiving antenna and/or plugging the receiving equipment
into a different AC outlet (such that the computing equipment and receiver are on different branches).
Compliance
A • Compliance information
60