Dif; Menu - Panasonic AJ-HPM100P Operating Instructions Manual

DIF

This menu is used for setting up the digital video interface.
Item
FR SUPER
No. DISP.
880 DIF SPEED
882 DIF IN CH
883 DIF OUT CH
886 DIF CONFIG
890 DIF AUD OUT

MENU

This menu is used for menu settings.
Item
FR SUPER
No. DISP.
A00 LOAD
126
Setup: Item Settings
Setting
FR SUPER
No. DISP.
0000 S100 Specifies the transfer speed of digital video interface output.
0001 S200 0:100 Mbps
0002 S400 1:200 Mbps
2:400 Mbps
NOTE:
A DVCPRO HD format signal cannot be output when S100 is selected.
0000 0 Specifies input channels.
| | 0 - 63: These channels are fixed to assigned values.
0063 63 64: This channel is not fixed to assigned values.
0064 AUTO When the power is on, the input channel is initialized to 63.
0000 0 Specifies output channels.
| | 0 - 63: These channels are fixed to assigned values.
0063 63 64: This channel is not fixed to assigned values.
0064 AUTO When the power is on, the output channel is initialized to 63.
0000 DFLT Specifies the extension menu.
Normally, DFLT is used.
0001 1
| |
0255 255
0000 CH1+2 Specifies the output channels when the audio signals are in 4-channel mode and output in
the DVCPRO (25 Mbps) format and a DV clip is played back.
0001 CH3+4
0: CH1 and CH2
1: CH3 and CH4
Setting
FR SUPER
No. DISP.
0000 USER2
Specifies user files loaded in USER 1.
0: Loads the contents of USER 2
0001 USER3
1: Loads the contents of USER 3
0002 USER4
2: Loads the contents of USER 4
0003 USER5
3: Loads the contents of USER 5
NOTE:
Pressing the MENU button when loading completes opens a
confirmation screen. Press the SET button to store the setting. Press
the EXIT button to discard the change and retain the setting.
* An underlined setting indicates an initial value.
Settings and brief function description
* An underlined setting indicates an initial value.
Settings and brief function description Remarks
Setting available
for USER1 only