IMO iDrive EDX 100V series 1-ph/0.2 – 0.75kW (0.25 – 1HP) Owner's Manual page 18

E.
Fuse types
Drive input fuses are necessary to disconnect the drive from the power supply in the event of component failure in
the drive's power input circuit. The iDrive's electronic protection circuitry is designed to clear output short circuits
and ground faults without blowing the input fuses. The table below shows the iDrive EDX input fuse ratings.
To protect the iDrive most effectively, use fuses with quick-blow characteristics (semi-conductor fuses).
It is the responsibility of the user/installer to ensure that the correct fuse protection (or other) is applied.
RK5, CC/T type fuses for iDrive EDX
-phase
110V input models (1
EDX-
020-11
040-11
075-11
220V input models (1-phase)
EDX-
020-21
040-21
075-21
150-21
220-21
220V input models (3-phase)
EDX-
020-23
040-23
075-23
150-23
220-23
440V input models (3-phase)
EDX--
075-43
150-43
220-43
UL class fuses overload characteristics.
RK5 - type has a time delay characteristic
T-type is quick-blow
CC – type have both types of characteristic
*
Fuse ratings are based upon 250V fuses for 120V inverters, and 300V fuses for 240V inverters, and 600V
for 480V inverters.
)
100% CONT
HP KW KVA
Output AMPS (A)
0.25 0.2 0.53
0.5 0.4 0.88
1 0.75 1.6
100% CONT
HP KW KVA
Output AMPS (A)
0.25 0.2 0.53
0.5 0.4 0.88
1 0.75 1.6
2 1.5 2.9
3 2.2 4.0
100% CONT
HP KW KVA
Output AMPS (A)
0.25 0.2 0.53
0.5 0.4 0.88
1 0.75 1.6
2 1.5 2.9
3 2.2 4.0
100% CONT
HP KW KVA
Output AMPS (A)
1 0.75 1.7
2 1.5 2.9
3 2.2 4.0
Chapter 3 Environment description and installation
Max.RK5
FUSE Rating(A)
1.7
10
3.1
15
4.2
20
Max.RK5
FUSE Rating(A)
1.7
8
3.1
10
4.2
15
7.5
20
10.5
25
Max.RK5
FUSE Rating(A)
1.7
5
3.1
8
4.2
12
7.5
15
10.5
20
Max.RK5
FUSE Rating(A)
2.3
6
3.8
10
5.2
10
3-8
Max.CC or T
FUSE Rating(A)
20
30
40
Max.CC or T
FUSE Rating(A)
15
20
30
40
50
Max.CC or T
FUSE Rating(A)
8
10
15
20
30
Max.CC or T
FUSE Rating(A)
10
15
20