Chapter 2 ~ Part Number Description - IMO iDrive EDX 100V series 1-ph/0.2 – 0.75kW (0.25 – 1HP) Owner's Manual

Chapter 2 ~ Part numbering description
iDrive product rating label (example)
!
CAUTION
Model: EDX-040-21-E
INPUT: AC 1 phase 50 / 60Hz
OUTPUT:AC 3 phases 0 – 200Hz
IP20 / UL Open Type (rated -10°C to 50°C Ambient)
WARNING: THIS PRODUCT MUST BE EARTHED IN ACCORDANCE WITH THE
iDRIVE V4 (OR LATER) INSTRUCTION MANUAL AND LOCAL/NATIONAL WIRING
CODES IN FORCE WHERE THIS iDRIVE IS TO BE INSTALLED.
iDrive part numbers – key to product rating label
EDX - 040
Nominal
Series:
motor capacity:
020:
0.18kW / 0.25 HP
040:
0.37kW / 0.5 HP
075:
0.75kW / 1.0 HP
150:
1.5kW / 2.0 HP
220:
2.2kW / 3.0 HP
Do not inspect components unless the lamp is off
See manual for correct installation and operation
Motor Rating: 0.5HP / 0.4KW
VOLTAGE:
VOLTAGE:
- 2 1
Input Input
voltage: phases
1:100V 1: 1- phase
2:230V 3: 3-phase
4: 400V
2-1
Chapter 2 Model description
200 – 240V (+10%, -15%)
0 - V
IN
IMO Precision Controls Ltd
- E
EMC filter :
E: Integrated Filter
Blank: No Filter
I : 5.4A
RMS
I : 3.1A
RMS
-
Enclosure
N4S: IP65
/NEMA4 + water
and dust-proof
isolator / switch /
potentiometer
N4: IP65
No switches etc
Blank: IP20