Selecting All Ports - Paradyne COMSPHERE 3920PLUS Installation And Operation Manual

COMSPHERE 392xPlus Modems
The port field (for example, Port1) displays the selected port.
The available Data Stream action (Disable or Enable) appears on the second line of the LCD
beside the port field. If the modem's data transmitter is enabled, the word Disable appears to
indicate that you may disable the data transmitter by selecting this action.
To change the modem's data stream, press the F2 key. When the message Command Complete
appears, press the
To change the data stream for the selected port again, press the F2 key.
or
To exit this function and remain in the Control branch, press the
Top-Level menu, press the

Selecting All Ports

Selecting All will enable or disable the modem's data transmitter function on all ports.
From the Select DS Port screen, press the F3 key to select All.
To enable or disable the modem's data transmitter function on all ports, press the appropriate
function key, F1 (Enable) or F3 (Disable). When the message Command Complete appears, press
the
3-38
Data Stream
Port1 Disable
F1 F2
key to clear the message.
Data Stream
Port1 Enable
F1 F2
key.
Select DS Port
Port1
F1 F2
Data Stream All
Enable Disable
F1 F2
key to clear the message.
November 1996
F3
F3
>
All
F3
F3
key. To exit and return to the
3920-A2-GN31-30