Abort - Paradyne COMSPHERE 3920PLUS Installation And Operation Manual

To access the Test branch from the Top-Level menu, make the following selections:
Press the

Abort

Abort ends any test that is in progress and brings the modem back to the normal mode of
operation. Confirmation is provided by the Command Complete message.
To access Abort from the Test branch, make the following selection:
Select Abort.
The modem stops all tests currently in progress and displays the Command Complete status
message on the LCD.
To exit this function and remain in the Test branch, press the
Top-Level menu, press the
3920-A2-GN31-30
Leased:28.8
Control Test
F1 F2 F3
key until Test appears. Select Test.
Test: >
Abort Self
F1 F2 F3
Test:Abort
Command Complete
F1 F2 F3
key.
November 1996
DCP Operation
key. To exit and return to the
3-55