Paradyne COMSPHERE 3920PLUS Installation And Operation Manual page 62

V.34
When running V.34 modulation, this function displays information about the modem's receiving
and transmitting data rate, symbol rate, transmitting level, and asymmetric rate.
To access V.34 from the Status branch, make the following selection:
Select V.34.
If the modem is receiving a signal, the signal quality appears on the second LCD line. Press the
asymmetric. If the modem is not receiving a signal, the message No Sync appears.
TxRate
RxRate
SymbolRate
TxLevel
AsymRate
3920-A2-GN31-30
The V.34 status display is available only when the modem is
configured for V.34 modulation.
Status:
DTE
F1 F2
Status: V.34
TxRate = xxxx Kbps
F1 F2
key to scroll and view the V.34 modem receive rate, symbol rate, transmit rate, and
Modem Transmit Rate indicates the rate at which the modem is transmitting
data. Possible values are 2400, 4800, 7200, 9600, 12.0 (12,000), 14.4 (14,400),
16.8 (16,800), 19.2 (19,200), 21.6 (21,600), 24.0 (24,000), 26.4 (26,400),
28.8 (28,800), 31.2 (31,200), or 33.6 (33,600) bps.
Modem Receive Rate indicates the rate at which the modem is receiving data.
Possible values are 2400, 4800, 7200, 9600, 12.0 (12,000), 14.4 (14,400),
16.8 (16,800), 19.2 (19,200), 21.6 (21,600), 24.0 (24,000), 26.4 (26,400),
28.8 (28,800), 31.2 (31,200), or 33.6 (33,600) bps.
Symbol Rate indicates the baud rate used by V.34 modulation. Refer to CCITT
specifications. Possible values are 3429, 3200L, 3200H, 3000L, 3000H,
2800L, 2800H, 2743L, 2743H, 2400L, 2400H.
Transmit Level indicates the power level at which the modem is transmitting
when running V.34 modulation. Possible values are 01– 64 dBm.
Asymmetric Rate indicates the rate symmetry when running V.34 modulation.
Refer to the Asymmetric Rate configuration option in the Dial Line or Leased
Line section of Chapter 4.
November 1996
NOTE
V.34
F3
F3
DCP Operation
3-25