Paradyne COMSPHERE 3920PLUS Installation And Operation Manual page 53

COMSPHERE 392xPlus Modems
The following provides information about the Quick Configuration LCD display.
a
bbb
c
dd
ee
ffff
xxxx
yyyyy
zz
To exit the Quick Configuration function and return to the Top-Level menu, press the
or
3-16
Displays the network position of the modem. The letter C indicates this is a
control modem, and T indicates this is a tributary modem.
Displays the network management address of the modem. The valid address field
range is from 001 to 256.
Displays the DTE mode. The letter A indicates the currently selected port is in
Asynchronous mode, and S indicates the currently selected port is in Synchronous
mode. If the NMS channel is selected, the letter in this location (A or S) will
indicate the status of Port 1. (The NMS channel is always in Asynchronous
mode.)
Displays the line mode. The letters LA indicate Leased Answer mode, LO
indicate Leased Originate mode, and D indicates Dial mode.
Displays the modem DTE port that currently appears by the EIA status indicators
on the DCP.
CC indicates Control Channel.
DC indicates Diagnostic Channel.
P1 indicates Port 1 in Singleport mode.
The following only appear on the 392x multiport modem:
M1 indicates Port 1 when TDM/MSD is enabled.
M2 indicates Port 2 when TDM/MSD is enabled.
M3 indicates Port 3 when TDM/MSD is enabled.
M4 indicates Port 4 when TDM/MSD is enabled.
B1 indicates Port 1 when DTE Bridge is enabled.
B2 indicates Port 2 when DTE Bridge is enabled.
Displays the modem's modulation scheme as shown below:
V34 indicates V.34 family modulation.
V32t indicates V.32 terbo modulation.
V32b indicates V.32bis modulation.
V32 indicates V.32 modulation.
TMp indicates Trellis Multipoint modulation.
V22b indicates V.22bis modulation.
V27b indicates V.27bis modulation.
V33 indicates V.33 modulation.
V29 indicates V.29 modulation.
V22 indicates V.22 modulation.
V23 indicates V.23 modulation.
V21 indicates V.21 modulation.
212A indicates Bell 212A modulation.
103J indicates Bell 103J modulation.
Modem Transmit Rate indicates the rate at which the modem is transmitting data.
Possible values are 2400, 4800, 7200, 9600, 12.0 (12,000), 14.4 (14,400),
16.8 (16,800), 19.2 (19,200), 21.6 (21,600), 24.0 (24,000), 26.4 (26,400),
28.8 (28,800), 31.2 (31,200), or 33.6 (33,600) bps.
Symbol Rate indicates the baud rate used by V.34 modulation. Refer to CCITT
specifications. Possible values are 3429, 3200L, 3200H, 3000L, 3000H, 2800L,
2800H, 2743L, 2743H, 2400L, 2400H.
Transmit Level indicates the power level at which the modem is transmitting
when running V.34 modulation. Possible values are 01– 64 dBm.
key.
November 1996
, ,
3920-A2-GN31-30