Paradyne COMSPHERE 3920PLUS Installation And Operation Manual page 83

COMSPHERE 392xPlus Modems
Cloning a Single TMp Remote
Press the F1 key to select Single Clone Remote.
The address field (xxx) displays the network management address of the modem that receives the
download. The valid address field range is from 001 to 256.
To increment digits within the address field (xxx), use the
( _ ) under the digit to be incremented. Press the F2 ( ) key to increment the digit.
Press F1 (Ent) to select the modem that will receive the download.
The password field (yyyyyyyy) displays the remote access password for the modem that will
receive the download.
To increment digits within the password field (yyyyyyyy), use the
cursor ( _ ) under the digit to be incremented. Press the F2 ( ) key to increment the digit.
Press Enter (Ent) to select the modem that will receive the download.
After completing these actions, proceed to the section titled Implementing a Clone Remote
Operation.
3-46
Choose DLL Type >
Single Multiple
F1 F2 F3
Choose Address:
Ent xxx
F1 F2 F3
Choose Password:
Ent yyyyyyyy
F1 F2 F3
November 1996
and keys to position the cursor
and keys to position the
3920-A2-GN31-30