Paradyne COMSPHERE 3920PLUS Installation And Operation Manual page 245

Sync Leased
Configuration
Default
Option
Settings
Dial Line
Dial Modulation V.34
Dial Line Rate 28800 (V34)
Automode Enable
Autorate Enable
V32bis Override Disable
Dial Tx Level Permissive
(–9 dBm)
V.22bis Guard Disable
Tone
Train Time Long
Asymmetric Disable
Rate
Lease Line
Lease Modulation V.34
Leased Line Rate 28800 (V34)
Leased Mode (4-wire Ans) or
(4-wire Orig)
Autorate Enable
Disable
V32bis Override
Leased Tx Level 0
Asymmetric Rate Disable
Auto Dial Backup Disable
Auto Dial Standby Disable
Special Standby Disable
Dial Standby Time 10 min
Carrier On Level – 43 dBm
Refer to Chapter 4, DCP Configuration , for additional information.
Not applicable when MUX Mode is enabled.
3920-A2-GN31-30
Table F-1
(6 of 10)
Factory Default Configuration Options
Async Leased TMp
Default Default
Settings Settings
V.34 V.34
28800 (V34) 28800 (V34)
Enable Enable
Enable Enable
Disable Disable
Permissive Permissive
(–9 dBm) (–9 dBm)
Disable Disable
Long Long
Disable Disable
V.34 TMp
28800 (V34) (19200 – control)
or (14400 – trib)
(4-wire Ans) or (4-wire Orig –
(4-wire Orig) trib) or (4-wire
Ans – control)
Enable Enable
Disable Disable
0 0
Disable
Disable
Disable Disable
Disable Disable
Disable Disable
10 min 10 min
– 43 dBm (–26 dBm –
Control) or
(– 43 dBm – trib)
November 1996
Default Configuration Options
Async Dial UNIX Dial
Default Default
Settings Settings
V.34 V.34
28800 (V34) 28800 (V34)
Enable Enable
Enable Enable
Disable Disable
Permissive Permissive
(–9 dBm) (–9 dBm)
Disable Disable
Long Long
Enable Enable
V.34 V.34
28800 (V34) 28800 (V34)
Disable Disable
Enable Enable
Disable Disable
0 0
Enable Enable
Disable Disable
Disable Disable
Disable
Disable
10 min 10 min
– 43 dBm – 43 dBm
Sync Dial
Default
Settings
V.34
28800 (V34)
Enable
Enable
Disable
Permissive
(–9 dBm)
Disable
Long
Disable
V.34
28800 (V34)
Disable
Enable
Disable
0
Disable
Disable
Disable
Disable
10 min
– 43 dBm
F-7