Dte - Paradyne COMSPHERE 3920PLUS Installation And Operation Manual

COMSPHERE 392xPlus Modems

DTE

DTE displays the state and/or activity of the following interface leads: LSD, DTR, DSR, TST,
TXD, RXD, RTS, and CTS. The interface leads status is updated every 5 seconds.
To access DTE from the Status branch, make the following selections:
Press the
Select the appropriate port by pressing the corresponding function key. Press the
other ports into view. Only Ports 1 and 2 appear when the the DTE Bridge configuration option is
enabled.
This screen does not appear in Singleport mode.
The activity and state of the modem's DTE signal appear on the LCD's bottom line. Press the
key to scroll other signals into view.
The LCD's bottom line displays a pair of symbols for each interface lead. The first symbol
indicates the signal's activity since entering the DTE status display. An * (asterisk) indicates at
least one transition while a blank space indicates no transitions.
The second symbol indicates the state of the interface lead at the sampling time. A
indicates a Space or ON condition while an underscore ( _ ) indicates a Mark or OFF condition.
To exit this function and remain in the Status branch, press the
Top-Level menu, press the
3-24
Status:
Identity DTE
F1 F2 F3
key until DTE appears. Select DTE.
Select DTE Port >
Port1 Port2
F3
F1 F2
LSD DTR DSR Tst >
_ * _
F1 F2 F3
key.
November 1996
key to scroll
(solid block)
key. To exit and return to the
3920-A2-GN31-30