Paradyne COMSPHERE 3920PLUS Installation And Operation Manual page 240

COMSPHERE 392xPlus Modems
Sync Leased
Configuration
Default
Option
Settings
DTE Interface
(Multiport mode)
MUX
Sub-group
MUX Mode TDM/MSD
Tx Clock Source Internal
Backup Tx Clock Internal
Source
CT111 Rate Disable
Control
MSD Port Host
Control
Port Rate
Sub-group
Modem MSD Disable
Rate at 33.6 K 33600 Port1 or
Disable (Ports 2,
3, 4)
Rate at 28.8 K 28800 Port1 or
Disable (Ports 2,
3, 4)
Rate at 24.0 K 24000 Port1 or
Disable (Ports 2,
3, 4)
Rate at 19.2 K 19200 Port1 or
Disable (Ports 2,
3, 4)
Rate at 16.8 K 16800 Port1 or
Disable (Ports 2,
3, 4)
† Not applicable when Async/Sync mode is set to Async.
Refer to Chapter 4, DCP Configuration , for additional information.
Not applicable when MUX Mode is disabled.
F-2
Table F-1
(1 of 10)
Factory Default Configuration Options
Async Leased TMp
Default Default
Settings Settings
TDM/MSD (TDM/MSD –
trib)
(DTE Bridge –
control)
Internal (RXC_Loop –
trib)
(Internal –
control )
Internal (RXC_Loop –
trib)
(Internal –
control )
Disable Disable
Host Host
Disable (Disable Control)
or (Enable Trib)
33600 Port1 or 33600 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
28800 Port1 or 28800 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
24000 Port1 or 24000 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
19200 Port1 or 19200 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
16800 Port1 or 16800 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
November 1996
Async Dial UNIX Dial
Default Default
Settings Settings
Disable Disable
Internal † Internal †
Internal † Internal †
Disable Disable
Host Host
Disable Disable
33600 Port1 or 33600 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
28800 Port1 or 28800 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
24000 Port1 or 24000 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
19200 Port1 or 19200 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
16800 Port1 or 16800 Port1 or
Disable (Ports 2, Disable (Ports 2,
3, 4) 3, 4)
Sync Dial
Default
Settings
TDM/MSD
Internal
Internal
Disable
Host
Disable
33600 Port1 or
Disable (Ports 2,
3, 4)
28800 Port1 or
Disable (Ports 2,
3, 4)
24000 Port1 or
Disable (Ports 2,
3, 4)
19200 Port1 or
Disable (Ports 2,
3, 4)
16800 Port1 or
Disable (Ports 2,
3, 4)
3920-A2-GN31-30